How to increase drive C in Windows 7, 8, XP at the expense of drive D without losing data?
Improperly divided into several smaller local hard drive brings more problems than good. An example of this may be a small amount of memory on the system disk C, which will very soon end if you actively use a computer and install different programs. But there is nothing unreal. Today we will learn how to increase drive C.
The essence of the problem
The need to add a few gigabytes of C drive is a fairly common occurrence. This problem occurs when, during the initial installation of the Windows operating system, the disks are incorrectly partitioned and the system disk C is set to a maximum of 20 GB. 10 years ago this would be quite enough. But now computers are more powerful, and the list of programs has expanded considerably, not to mention the online games and updates that weigh dozens of gigabytes. Therefore, 20 GB, taking into account the fact that Windows has just been installed, will suffice at best for a month of work, after which the PC user will begin to seriously think about how to increase the C drive.By disk C is meant systemic, i.e. the one on which the operating system stands, since for the most part it is it that performs this role.
In fact, it is much easier than it may seem. There are a large number of utilities that are related to the partition managers of the hard drive and are able to manage it, including increasing the capacity of one by taking a piece of memory from another. A good program to manage your hard drive is Acronis Disk Director. The only negative is that it is paid. You can certainly find a pirated version, but why break the law if there is a good, absolutely free utility AOMEI Partition Assistant Standart Edition.
A couple of lines about the program
AOMEI Partition Assistant Standart Edition is a great hard disk management utility. The license is absolutely free for both home and commercial use. The utility is completely in Russian, as a result of which problems with the use should not arise. In addition, its interface is similar to Acronis Disk Director, and those who used Acronis will hardly feel the difference and will not have to think for a long time how to increase the C drive. level understand what yes how.This utility has shown itself in the best way, as evidenced by a bunch of positive reviews on various websites and blogs.
Without preparation anywhere
Before you increase the C drive, you need to download and install this utility. Go to the official website AOMEI, find the desired program and download. Run the installation process. Click "Next" and wait for the end. If it was downloaded not from the official site, but from a third-party, then the installation process should be monitored in order not to install Satellite Mail and the Amigo browser. The utility is installed, but do not rush to run it.
Create a backup
Before you increase the C drive in Windows 7, you need to make a backup of the system. Backup is a function that creates a copy of the data (restore point) of one or more disks to return to this point in case of any problems. This is done very simply:
- Open the properties of my computer, where you can find the section "Advanced system settings."
- When the parameters window appears, click on the "System Protection" tab, where the existing disks and information about their security should be displayed, i.e. whether a restore point was created on them or not.
- Select the C drive, click "Configure".Here we put a tick on "Restore system settings ...", if not worth it, and allocate space for backup (percent 5-10). This must be done so that you can save multiple restore points and roll back from an earlier one, since they constantly replace each other. Click "OK".
- Now click on the "Create" button. Give the name to the future backup, click "Create".
- The same procedure can be carried out with the disk D.
You can view the newly created restore point in “Start”, then “standard: / service: / system recovery”.
Of course, backup is absolutely not necessary before increasing the hard disk C. But it is worth remembering that AOMEI Partition Assistant Standart Edition is a hard disk manager, and if some kind of error occurs, then all the information can be damaged.
How to increase drive C?
Run the program. Immediately, you will notice that it displays all the disks on the hard drive plus a reserved area. So, our goal is nothing more than to increase the C drive by using the D drive (Windows 7) without losing data. To do this, right-click on the disk D and click on the first item from the "Resize Partition" list. Now either move the demarcation from left to right, markinghow much you need to separate, or in the column "Unallocated space in front of" type the required number of gigabytes. Click "OK".
As you can see, the picture has changed somewhat: an unallocated area has appeared, which we need to attach to C. We click on it with the right one and act the same as with D, “Resize Partition”. Here a window already known to us opens, in which you need to move the delimiter slider to the right to the end. To start the process, click "Apply". But before increasing the disk C due to the disk D, recheck the parameters of the operation in the window that appears. If everything is in order, click "Go" and "Yes." After that, the process of transferring free space to C will begin. This, in fact, is the whole operation of separation.
Acronis Disk Director
As described above, Acronis interface is similar to AOMEI Partition Assistant Standart Edition. However, the problem regarding how to increase the C drive due to the D drive (Windows 7), here is solved a little differently.
First you need to have a license of this utility, since the demo version only allows you to transfer a few gigabytes. Install, create a restore point, run. Select the disk D and click on the "Resize Volume" toolbar.Up to this point, it was necessary to determine how to increase the C drive due to the D drive (Windows XP or 7). Drag to the right as far as needed for C. After clicking on the button "Apply pending operations", which is distinguished by a black flag. As you can see, the utility began to separate the place.
We do the same with the C disk, namely, go to the section for changing the size of the volume and move the slider to the maximum to the right. The only difference is that here you need to tick the item "Add unallocated space to that" with a bird. After just click on the black flag. However, after sharing the memory with this utility, you will need to restart the computer.
It is also best to do the separation of disks "Acronis" using a boot disk or flash drive with the program. The program itself will help to do this.