How to clean the washing machine with citric acid. How to clean the washing machine drum
No matter how the hostesses make a promise to check the pockets before washing, from time to time old receipts, coins, cell phones, nails and other small and not very good items get into the washing machine drum along with the linen. Large things, of course, do not disappear anywhere - after washing, the owners take them along with t-shirts and jackets. And where does every little thing go: coins, chains, carnations, paper clips, etc.? Of course, in the filter.In the same place, things that accidentally come off during washing are stuck: bones from a bra, buttons, fabric fibers. If the filter does not look for a long time, it will become blocked, and the machine will stop working. Therefore, it should be washed and cleaned from stuck items at least once every six months, and if there is a suspicion that something could get into it - immediately after washing.
Clean the filter
How to clean the washing machine filter? As a rule, this is described in the instructions for each specific model. In some washing machines, you can immediately see a small window under the hatch. For others, for example, Indesit, the filter is hidden behind a horizontal panel, which must be removed before cleaning. On top-loaded models, it is hidden inside the machine, and in order to clean the filter, it is necessary to remove the drum blade.
However, this is not the only spare part that requires care in a washing machine. During the long years of operation, the unit is overgrown with lime deposits from the inside. They accumulate on the pipes, on the inside of the drum, on the heater and other places. There are many ways to clean an automatic washing machine, and one of them is citric acid.
What is dangerous scale?
Surely each of us remembers advertising a special tool against scale of famous brand. In it, the developers claim that literally every second car in Russia fails, it forms a raid, if you do not use the miracle drug at each wash.
Of course, what can not be said to sell your goods.And in fact? How can scale damage the machine so that it breaks down after two years, and then water would flow out of it, which means that the tightness is broken? The answer to these questions, perhaps, manufacturers can not give. Scale is really harmful, primarily due to the fact that it is deposited on heating elements and serves as an insulator. In order for the heater to raise the water temperature to the desired level, it is necessary to work longer without stopping. This means that energy consumption increases on the one hand, and on the other hand, TEN generates its resource ahead of time.
How to remove scale from the heater? How to clean the washing machine drum? Lemon acid, "Calgon" or some other remedy? How often should this be done? Consider this question in more detail.
Does “Calgon” be added at every wash?
If you look closely at the list of ingredients of washing powder, you will notice that it consists of special additives that prevent the formation of scale. If the water is soft or medium hard (this usually flows in the faucet), they are quite enough for the entire service life of the machine. The heater will be covered with scale, but this process will not be so insignificant and will have little effect on the operation of the unit.The maximum that needs to be done in this case is to carry out periodic cleaning. If the water is hard, for example, when the owners take it from a private well, then additives can be useful, but only in the minimum concentration. Why? Because the high content of active substances can not only remove salt deposits, but also corrode plastic or rubber components.
Use citric acid
This is a simple and inexpensive way to remove scale from the heater and drum. Before cleaning the washing machine with citric acid, you need to remove all things from the drum. Then you need to fall asleep 2 tbsp. spoons of acid inside the machine. This can be done in two ways: put them directly in the drum or in the tray to receive the powder. In the first case, there is a higher probability that all the powder will completely dissolve and end up in the tank. In the second, the cleaning agent will also wash the tray, but there is a chance that the acid residues will remain on its walls. Because of this, the laundry may suffer if it is started in the laundry immediately after cleaning. To minimize possible losses, before cleaning the washing machine with citric acid, you must include an additional rinse. In this case, the three rinses that are included in the cycle will be added two more.
The next thing you need to do before cleaning the washing machine with citric acid - set the program. Choose the longest cycle at the highest temperature. If you choose a short at 30-40 degrees, the tool does not have time to act and effectively remove scale.
We use special tools
Manufacturers of household chemicals have long understood that washing machines need periodic cleaning and began to produce special means for removing limescale deposits. They are not as common as the famous "Kalgon", because whatever one may say, it is more profitable for industrialists that consumers buy powder to prevent the occurrence of scale constantly. But a small box, which is required every six months, will not bring such a profit. However, it is easy to find these tools. They are sold both in departments with household chemicals, and in stores selling appliances as related products. Descaling can be as easy and effective as cleaning a washing machine with citric acid. On the back of the package it is written how, where, how much to fall asleep, at what temperature to clean and so on.
Can I sleep more?
Some owners adhere to the old principle: more means better.Better to clean, better to wash. Therefore, instead of two tablespoons they put ten, arrange a monthly cleaning instead of having it done every six months. What is it fraught with? Do not forget that citric acid - although it is weak, but still acid. In high concentrations, it can not just clean the washing machine from scale, but also eat up the rubber of the hoses, especially if they are old and hold on to an honest word. It will not seriously damage the plastic parts, but still, in a large dosage, it will shorten the life of the machine rather than prolong it.